- Launch CADWorx Plant Professional
Click File > Open, and then open the Export to VUE.dwg drawing.
- Click Export to VUE file.
Select Entire Drawing.
- Type VUE Tutorial Model in File name, and then click Save.
The VUE Tutorial Model.txt displays.
- Review this file for any failed lines.
- Close the.txt file.
Display .vue file in SmartPlant Review
1. Click Start > All Programs > Intergraph SmartPlant Review > SmartPlant Review.
Tip: If you do not have SmartPlant Review, you can open the .vue file in CADWorx Design Create.
SmartPlant Review displays.
2. Click File > Open.
3. Navigate to PPM\Training\CADWorx 2015\Export to VUE, select VUE Tutorial Model.vue, and then click Open.
The Create Project dialog box displays.
4. Click OK.
The models opens, but you have to adjust the view to see the entire mode.
5. Click Fit View to Model
The model displays.
6. Click Properties.
The Properties dialog box displays.
7. Select a component to display the properties data.
|Adding/Modifying Actuators to Valves in CADWorx
|Command location: CADWorx plant 1 >> Misc >> Top Works Add
AutoCAD Shortcut command: Topadd/TOPWORKSADD
|Step1: Click on CADWorx >> Misc >> Top Works Add
|Step2: Select the Valve which is placed already
|Step3: Specify with type of Actuator
|And provide alignment angle if required
|And Provide Orientation Angle
|How to change/Delete the Actuator in CADWorx
|Command location: CADWorx plant 1 >> Misc >> Top Works Change
|AutoCAD Shortcut command: Topchg/ TOPWORKSCHANGE
|Step1: Click on CADWorx >> Misc >> Top Works change
|Step2: Select the Valve which is placed already with Actuator
It will ask Change topworks/Change Orientation/Delete
Select the option which you want to update/delete.
We hope you enjoyed our webinar. For your reference we have attached the link for the recording. Please feel free send us your feed back : firstname.lastname@example.org
Date: May 27, 2015
Time: 09.30 AM UAE Time and 11.00 AM India Time
Time Duration: 30 min
Cost: free webinar
Discover the latest advances in PV Elite 2015. Design equipment for the most extreme uses quickly, accurately and profitably by taking advantage of:
- The new 3D PDF modeler
- CodeCalc improvements
- Output processor enhancements
- Additional configuration options
- Improved analysis capabilities
- And much more!
Deepak Sethia, a mechanical engineer by profession, is working as an Application Engineer for Plant Design Solutions with ImageGrafix Software FZCO, Dubai. He is a seasoned piping and static equipment design engineer with 7 years of experience in providing technical support and end user training on Intergraph CAESAR II, PV Elite and Tank software