Monthly Archives: August 2017

Editing Multiple Load Cases-

Use the Group Edit view of the Static Analysis – Load Case Editor to update values on multiple load cases at one time. This view saves you valuable time as you can make global changes to load cases, rather than having to edit each load case individually.

To perform a group edit of multiple load cases

1. Open a CAESAR II job.
2. Run error checking or the analysis, and then select Static Analysis.
3. Click Group Edit in the upper-right corner of the Static Analysis – Load Case Editor.

Static Analysis – Load Case Editor List View (the Default)

The List view shows all load cases in list format, making it easy to see a full view of load cases as you work.

Static Analysis – Load Case Editor Group Edit View 

The Group Edit view could be considered a bulk editor for all your load cases. This enables you to make mass changes to any selected load cases with just a few simple clicks.

To use the Group Edit view for changing load cases:

1.    Select multiple load cases and click Group Edit.

The software preserves the load case selections you made in the List view and keeps them highlighted in the Group Edit view.

2.    Change any field values in this view and the software updates all the load cases you previously selected.

3.    By toggling back to the List view, you can see the changes that were applied to each of the selected load cases.

Using the new Group Edit view can save a lot of time, and it only takes a few clicks.

Comments Off on Editing Multiple Load Cases-

Filed under CAESAR II, Home

Orthogen For CADWorx 10.2 Released

Hot Fix Release Announcement

Now Orthogen Supports CADWorx Structure 2017 R1

Hexagon PPM support has posted Orthogen_Update_10.02.00.5615.zip for Orthogen Version 10.2. This Hot Fix is now available for download from Hexagon PPM’s Customer Response System. Further information about what is contained in this Hot Fix is available in the Readme File link shown in the download description on the Service Packs and Fixes page.

To access this Hot Fix, please follow the steps below:

  1. Logon to Hexagon PPM’s Customer Response System at https://smartsupport.intergraph.com.
  2. Select the View Downloads tab.
  3. Select Orthogen.
  4. Select Service Packs and Fixes.
  5. Select the download icon or the file link of the Hot Fix.

If you have trouble accessing this Hot Fix or need further information, please file a Service Request for Orthogen 10.2, and an analyst will be happy to assist you.

Thank You for being a Hexagon PPM customer!

Comments Off on Orthogen For CADWorx 10.2 Released

Filed under CADWorx, CADWorx Plant Pro, Home

Join ImageGrafix Wednesday Webinar to learn GT STRUDL CAD Modeler

Wednesday Webinar with ImageGrafix Software

 

Join ImageGrafix Wednesday Webinars to learn about frame & finite element model creation and structural analysis in GT STRUDL CAD Modeler.

23rd Aug, 10.00AM GST

The new enhancement features in GT STRUDL CAD Modeler Graphical User Interface (GUI) allows the structural engineers and designers to take full advantage of CAD’s 3D graphical environment to create true models for structural analysis and design.
Webinar would highlight the rich collection of easy to learn and instinctive modeling tools to accurately specify structure information, including:

• Framing
• Finite elements
• Connectivity
• Loads
• Load combinations
• Execution of Analysis
Visualization
• Results viewing in CAD environment. 

 

>> REGISTER HERE

Comments Off on Join ImageGrafix Wednesday Webinar to learn GT STRUDL CAD Modeler

Filed under GT Strudl, Home, Webinars

CADWorx Command of the Month Apply Trimmed Elbow Rule

In CADWorx Plant if design need the Custom or nonstandard Angle elbow, there is an option in Piping rule to Enable the Trimmed Elbow while routing.

Go to CADWorx Plant Setup > Piping Rules > Select pulldown menu in “
Apply Trimmed Elbow Rule



By Default, the value would be “No”



Available options: No or Automatic

Places trimmed buttweld elbows in the drawing when using ROUTE.

No: Does not allow for trimmed buttweld elbows.

Automatic: Router allows for trimmed buttweld elbows.



Comments Off on CADWorx Command of the Month Apply Trimmed Elbow Rule

Filed under CADWorx, CADWorx Plant Pro, Home