Category Archives: Webinars

CAESAR II Webinar: Using Load Case Multipliers to Expand Load Conditions


with Richard Ay, P.E., Vice President
Date: June 26, 2018
Time: 10 AM CDT click here to for your local time
Duration: 60 min
Cost: free eSeminar


Come experience the CAESAR II Static Load Case Editor in the live webinar with Richard Aye, P.E. The Static Load Case Editor is very powerful, providing complete control and customization of static load cases.

Expand your analysis capabilities of load conditions in the editor through the use ofload case multipliers. Learn how load case multipliers can extend loading conditions beyond what is specified in the piping input. Load case multipliers can be used to adjust the contribution of any linear load primitive.  Load case multipliers should not be used with non-linear load primitives, such as temperature.

Check out this webinar and attain a greater understanding of load primitives, load cases, load case multipliers, and the options in the Static Load Case Editor that provide a strong foundation for properly assessing the behavior of piping systems under a variety of operating scenarios.

Speaker bio:

Richard Ay is a registered professional engineer who serves as the vice president for analysis products. In 1985, at the request of Tony Paulin, one of the founders of COADE, Ay joined the company, which later became part of Intergraph. He has worked on the development of CAESAR II, TANK, product licensing, QA, technical support procedures, and technical presentations. Ay has previous experience at a major EPC firm and an offshore consulting firm. He holds a bachelor’s degree in Ocean Engineering and a master’s degree in Civil Engineering. Ay is a member of ASCE and ASME.

Comments Off on CAESAR II Webinar: Using Load Case Multipliers to Expand Load Conditions

Filed under CAESAR II, Home, Webinars

GT STRUDL® Webinar: GT STRUDL v2018 R1


with Joe Harrison, Hexagon PPM
Date:
 June 28, 2018
Time: 10 AM CDT click here to for your local time
Duration: 60 min
Cost: free eSeminar


Experience the difference with the new GT STRUDL v2018 R1 as we explore how the latest enhancements help you to do your job even more efficiently. We will cover:

  • Automatic Creation of Views
  • Stiffness Analysis launched from GTMenu
  • Report Builder launched from GT STRUDL
  • CAD Modeler
    • Report Builder launched from CAD Modeler
    • CAD Modeler Physical Member Creation/Display/Changes
  • Vertical Seismic Load Creation – changes to Seismic Load command and Dialog
  • Automatic ASCE & AISC Load Combinations
  • Placing Physical Member
  • Edit Physical/Analytical Members

Join us as we cover the extensive functionality offered with the new place Physical member capability to ease your modeling experience.

Speaker bio:

Joe Harrison is the Product Manager for Hexagon PPM’s Civil/Structural/Analytical Applications. He has a Master’s Degree in Structural Engineering and previously worked for Fluor Corporation as a Structural Engineer. At his role with Intergraph, he was the Software Development Manager for FrameWorks Plus and Executive Manager for Intergraph’s Smart 3D Structural and Civil Applications.  Currently, Joe is the Product Owner for GT STRUDL.

Comments Off on GT STRUDL® Webinar: GT STRUDL v2018 R1

Filed under GT Strudl, Home, Webinars

PV Elite Webinar – PV Elite SOLIDWORKS Plugin


with Carlos Valdez, Support Engineer, Hexagon PPM
Date:
 June 27, 2018
Time: 10 AM CDT click here to for your local time
Duration: 60 min
Cost: free eSeminar


In this webinar, learn about the items and geometries covered in the new PV Elite 2018 Plugin for SOLIDWORKS®. The PV Elite SOLIDWORKS plugin allows users to load a PV Elite .pvdb file directly into DSS SOLIDWORKS. The software converts the file to an assembly file. Saving time and helping in obtaining faster deliverables.

Take advantage of the ability to manage the vessel information associated with the model, such a smart tag which links the vessel data from your model Properties to a drawing.

Join us as we explore the software’s customization and detail for assembly representations, and see this powerful functionality for yourself during a live demonstration.

Speaker bio:

Carlos Valdez graduated with a B.S. in Mechanical Engineering from the University of Houston. With years of experience in customer service and with an engineering background, Carlos joined the Hexagon PPM team and took on the roll as a Support Engineer. He strives to find solutions and provide technical support for PV Elite and CAESAR II analysis software.

Comments Off on PV Elite Webinar – PV Elite SOLIDWORKS Plugin

Filed under Home, PV Elite & Tank, Webinars

CADWorx Webinar: Efficient Design of Wastewater Treatment Structures


with Aimee Ferguson, Hexagon PPM

with Michael Smith, Hexagon PPM

Date: June 21, 2018
Duration: 45 min
Cost: free eSeminar

Water treatment plants are vital to all of us and intrinsically tied to the energy industry. For modeling the specialized structures that are typical in the wastewater industry, it is important to have the right design tool in order to stay a step ahead of your competition.

In the fall of 2017, CADWorx Structure 2018 released several new tools that can be utilized in the design of wastewater treatment structures to help increase your efficiencies when modeling in this industry.

During this webinar, we will show how these tools can be used to their fullest potential, provide information on what opportunities this industry can offer you, and offer you some examples of success stories where CADWorx has been the tool of choice.

Speaker Bios:

Aimee Ferguson, P.E., is the product owner for CADWorx Structure, coming to Intergraph in 2008 after a career in Construction Field Engineering. Her background in structural engineering and construction with a large EPC has been leveraged in the development of several Intergraph products, including Smart 3D. Aimee has added agile software development skills to her technical experience and joined the CADWorx Structure team in 2016 in the product owner role to assist in launching and further developing this product. She is a registered Professional Engineer in Kentucky and Alabama.

Michael Smith serves as CADWorx Business Development Manager at Hexagon PPM. He joined the company in 2012 with more than 30 years of experience in the process industries, covering multiple aspects of design, engineering, and construction. Michael previously served as Director of Virtual Design and Construction (VDC) at a prominent mechanical contractor. He oversaw the implementation and use of engineering design tools such as CADWorx in US-based semiconductor plant mega projects. Michael also has experience working within the Autodesk channel as a Revit BIM Specialist.

Comments Off on CADWorx Webinar: Efficient Design of Wastewater Treatment Structures

Filed under CADWorx, Home, Structure, Webinars

Join us for a special CADWorx Webinar to get an opportunity to ease the challenges faced by water industry using CADWorx

CADWorx possesses an extensive and unique range of tools and capabilities that makes designing multi-discipline water treatment facilities fast, accurate and cost-effective. Whether you’re involved in waste water, water treatment, or desalination projects, CADWorx can meet the engineering and design challenges you face and project execution methodology your company follows to layout, design and deliver these types of facilities.
Key takeaways from the Webinar:
Using a waste water treatment and an associated water purification plant model as a basis for the live demonstration, learn how:


  • Concrete and steel structures – like sedimentation and aeration tanks – commonplace in waste water treatment facilities, are designed; 
  • In combination with BricsCAD BIM, buildings housing plant can be modeled and detailed in accordance with industry standards;
  • Piping used in water treatment facilities, having different materials, connections and construction methods, are easily routed and quickly changed when designs need to be revised;
  • Deliverables are generated automatically, ensuring an accurate and consistent handover of information to procurement, construction and commissioning, and eventually, operations and maintenance;

Topic: Designing Industrial Water Treatment Facilities with CADWorx.

Date: 11th April 2018, Wednesday

Time: 06.00PM (UAE,Oman)
05.00PM
(Qatar,Kuwait,Bahrain, KSA)

Speakers:
Paul Martin,
CAS Technical Director – Hexagon PPM.
Matthew Sims,
Application Engineer Hexagon PPM
Michael Smith,
BDM CADWorx Business

About the Speakers:
Paul Martin, CAS Technical Director – Hexagon PPM.
Matthew Sims, Application Engineer – Hexagon PPM
Michael Smith, CADWorx Business Development Manger

Copyright © *2017* *ImageGrafix Software FZCO*, All rights reserved.

CONTACT US:
*ImageGrafix Software FZCO* **
206 Jafza View 18, Dubai, UAE.
Tel: 04-8800857
Fax:04-8800858
Email:ImageGrafix@eim.ae
Web: www.image-grafix.com

Want to change how you receive these emails?
You can
update your preferences or unsubscribe from this list

 

Comments Off on Join us for a special CADWorx Webinar to get an opportunity to ease the challenges faced by water industry using CADWorx

Filed under CADWorx, CADWorx Plant Pro, Home, Webinars

CADWorx Plant Webinar: End Type Configurations for Alternative Industries


with Werner Theron, Chempute

Date: March 29, 2018
Time: 10:00AM CT  click here for your local time
Duration: 30 min
Cost: free eSeminar

With recent product updates, End Type configurations have been greatly enhanced to cater for a wider scope of different piping systems found in alternative industries, including:

• Pharmaceutical
• Food & Beverage
• Compressed Air
• Water Treatment
And other

Join us during this webinar and learn how to configure custom end types for accurate modelling as well as customizing Isogen for an accurate representation on the deliverable.

Speaker Bio:

Werner Theron is currently the CAD applications manager for Chempute Software, a position he has held since 2008, after he joined Chempute Software, CADWorx & Analysis Solutions Global Network Partner, in 2006. He graduated from the Academy of Advanced Design in 1998 as a multi-disciplinary designer before working for a large electronics / telecommunications firm and then later working for consulting engineers and then in the manufacturing industry. He has been using AutoCAD as a design tool since Version 13. His duties include sales, pre-sales demonstrations, technical support and also training and implementation of the CADWorx products. He has been a CADWorx Instructor at CADWorx & Analysis University, part of HxGN Live, 2013 -2015 and also won first prize in the 2012 CADWorx & Analysis Solutions Knowledge Base Advisor contest for 30 CADWorx articles he compiled.

Comments Off on CADWorx Plant Webinar: End Type Configurations for Alternative Industries

Filed under CADWorx, CADWorx Plant Pro, Webinars

PV Elite Webinar: Tool Tips, Output Program, and New Features Workshop


with Luis Sanjuan, Software Developer, Hexagon PPM

Duration: 45 minutes
Cost: free eSeminar

Click here to view the recorded webinar

Attend this informative workshop that will get you the tools to increase the productivity of PV Elite.

Stay competitive and learn the shortcuts to improve your PV Elite software skills to help you design and analyze faster and more efficiently with our best practices.

About the presenter

Luis graduated from the University of Texas Pan American with a BS in Mechanical Engineering.  Luis joined Hexagon PPM in 2008, and since then he has helped hundreds of PV Elite users, and their companies, become more efficient, by helping them improve their product knowledge and work processes. He performs software development and technical support for PV Elite and CodeCalc.

Comments Off on PV Elite Webinar: Tool Tips, Output Program, and New Features Workshop

Filed under Home, PV Elite & Tank, Webinars