|
||||||||||
|
||||||||||
|
||||||||||
|
|
||||||||||
|
||||||||||
|
||||||||||
|
Comments Off on Join us for a special CADWorx Webinar to get an opportunity to ease the challenges faced by water industry using CADWorx
Filed under CADWorx, CADWorx Plant Pro, Home, Webinars
Hot Fix Release Announcement
Hexagon PPM support has posted CADWorx_Plant_PID_2018_SP1_HF1.exe for CADWorx Plant Version 18.00.01.0074. This Hot Fix is now available for download from Hexagon PPM’s Customer Response System. Further information about what is contained in this Hot Fix is available in the Readme File link shown in the download description on the Service Packs and Fixes page.
To access this Hot Fix, please follow the steps below:
If you have trouble accessing this Hot Fix or need further information, please send an email to support@igfzco.com
Thank You for being a Hexagon PPM customer!
Comments Off on Hotfix CADWorx Plant PID 2018 SP1 HF1 is released
Filed under CADWorx, CADWorx P&ID, CADWorx Plant Pro, Home, Technical Literature
Comments Off on ImageGrafix Webinar CADWorx 2018 What’s New features and updates
Filed under CADWorx, CADWorx Plant Pro, Home, Webinars
In CADWorx Plant if design need the Custom or nonstandard Angle elbow, there is an option in Piping rule to Enable the Trimmed Elbow while routing. Go to CADWorx Plant Setup > Piping Rules > Select pulldown menu in “
By Default, the value would be “No”
Places trimmed buttweld elbows in the drawing when using ROUTE. No: Does not allow for trimmed buttweld elbows. Automatic: Router allows for trimmed buttweld elbows.
|
Comments Off on CADWorx Command of the Month Apply Trimmed Elbow Rule
Filed under CADWorx, CADWorx Plant Pro, Home
Service Pack Release Announcement
Hexagon PPM support has posted CADWorxPlant_2017_R1_SP1.zip for CADWorx Plant Version 2017 R1. This Service Pack is now available for download from Hexagon PPM’s Customer Response System. Further information about what is contained in this Service Pack is available in the Readme File link shown in the download description on the Service Packs and Fixes page.
To access this Service Pack, please follow the steps below:
If you have trouble accessing this Service Pack or need further information, please file a Service Request for CADWorx Plant 2017 R1, and an analyst will be happy to assist you.
Continue reading
Comments Off on CADWORX PLANT 2017 R1 SERVICE PACK 1 IS AVAILABLE
Filed under CADWorx, CADWorx Plant Pro, Home
Croatian engineering and analysis specialist Numikon improves productivity 640% with Intergraph CADWorx solutions
“When we first started using the Leica total station and Intergraph software the two companies trained our staff. It took them about ten days to get up to speed and start on their first project. We were particularly impressed by the in-depth knowledge of the Intergraph and Leica people. On the whole we estimate that our productivity has gone up by as much as 640% (six times)! This productivity gain means that we can minimize the on-site project time and maximize efficiency, offering our customers a very attractive package.” Mario Anić, Sales Manager from Numikon stated.
Numikon is a Croatian engineering company specializing in the calculation and analysis of mechanical, power and process equipment and components, project engineering of process and power plants, pipe stress analysis, pressure vessel design, as well as laser scanning and laser surveying.
Numikon executed a refinery project for INA-Industrija nafte d.d., a leading oil exploration, production, refining and marketing company in Croatia. INA was looking for an efficient solution to create as-built information for their Sisak refinery, and hired a consortium of companies for the project. Numikon was chosen to execute a laser scanning survey and create as-built models of the existing refinery.
The main challenge for Numikon was that the laser survey had to be undertaken while the refinery was operating, and some of the piping was difficult to access because of its location above ground, or because it was insulated, as well as the tight deadline of the project.
With the help of CADWorx fieldPipe Professional and CADWorx Plant Professional, Numikon surveyed their part of Sisak refinery in only 49 days. Using the laser surveyed data the company created all deliverables required by INA, including:
• 3D models
• Piping isometrics
• Details of piping components (valves, pressure regulators, flanges, supports, etc.)
• Tag and nameplate details
• Details of the equipment and connected piping
• Pipe stress analysis results (including required test pressure) and pipe data (wall thickness, material properties, etc.)
Curious to learn more about how Numikon improved productivity with 640%? View the whole case study (including pictures), or read the interview with Mario Anic, Sales Manager at Numikon.
Comments Off on Six Times Faster Brownfield Project Execution with Intergraph® CADWorx® Solutions
Filed under CADWorx Plant Pro, Home, News
Comments Off on How to add a custom actuator into CADWorx Specification editor
Filed under CADWorx Plant Pro, Home
Computer Solutions for Engineers
Computer Solutions for Engineers
Computer Solutions for Engineers