Tag Archives: Webinar

Join ImageGrafix Wednesday Webinars to learn how to manage the Portfolio using Primavera EPPM 16.2

Wednesday Webinar with ImageGrafix Software

 

In this Webinar you will learn:

  • Working with Portfolios
  • Portfolio views
  • Portfolio scenarios
  • What-if analysis
  • Capacity planning

REGISTER HERE

Comments Off on Join ImageGrafix Wednesday Webinars to learn how to manage the Portfolio using Primavera EPPM 16.2

Filed under Home, Webinars

Join ImageGrafix Wednesday Webinars & learn how to achieve proper design with Nozzle Code Compliance UG-37 & App 1-10

Wednesday Webinar with ImageGrafix Software

In this Webinar you will learn:

1. Process of designing properly reinforced nozzles for your vessel
2. Add reinforcement for the nozzles based on the UG-37 standards, which use area replacement in its calculations to achieve a proper design
3. Use Appendix I-10, which bases its calculations on examining a combination of Pressure and Area
4.  Take into consideration the Maximum Allowable Working Pressure (MAWP) for your nozzle reinforcement calculations

REGISTER NOW

About the Speaker:

Fauzan Badiwale is a Mechanical Engineer by profession and PGD in Piping Design and Engineering. He is working as a Sr. Application Engineer & Product Lead – Pressure Vessel Design. He has 6 years of experience in the software field. He has strong working knowledge on software’s such as PV Elite, Caesar-II, TANK and NozzlePro. He joined ImageGrafix in May 2013 and is responsible for pre-sales, software training and end-user support for ICAS & PRG products.

Comments Off on Join ImageGrafix Wednesday Webinars & learn how to achieve proper design with Nozzle Code Compliance UG-37 & App 1-10

Filed under FE/Pipe & Nozzle/PRO, Home, Webinars

CAESAR II LEARN ASME B31J THE IMPROVED METHOD FOR i k CALCULATION

Comments Off on CAESAR II LEARN ASME B31J THE IMPROVED METHOD FOR i k CALCULATION

Filed under CAESAR II, Home, Webinars

Join ImageGrafix Wednesday Webinars to learn about Pressure Vessel Simulation with ANSYS

Wednesday Webinar with ImageGrafix Software

In this Webinar you will learn:

o How to import a geometry in ANSYS workbench
o Perform a global analysis of the vessel and identify critical areas
o Submodeling technique to save time by simulating only specific parts
o ASME section VIII division 2 part-5, protection against local failure code checking

Register Here

Comments Off on Join ImageGrafix Wednesday Webinars to learn about Pressure Vessel Simulation with ANSYS

Filed under Home, Webinars

Join & learn in ImageGrafix Wednesday Webinar about how to link & process data in CADWorx Plant

In this webinar you will learn how to :

1.  Create Process drawing with proper data in CADWorx P&ID
2. To Create Pipe by using the Process line numbers in CADWorx Plant
3. Use Process data in CADWorx Plant using PIDView Command


Register Here

About the Speaker:

Visakan is the National Technical Manager for Plant Design Solutions at ImageGrafix Engineering Services Pvt. Ltd. He is a Mechanical Engineer with 19 Years of experience in CAD Industry handling Intergraph & Autodesk Products. He is responsible for product presentation, training and lead the technical support teams in ImageGrafix India

Comments Off on Join & learn in ImageGrafix Wednesday Webinar about how to link & process data in CADWorx Plant

Filed under CADWorx, Webinars

Join and learn in ImageGrafix Wednesday Webinars about CAESAR-II ASME B31J, the improved method for i & k calculation

In this Webinar you will learn:

1. Improve SIF(i) & Flexbility factor (k) with “More Applicable Data” calculated from ASME B 31J  over  Appendix D
2.Revised I & k  data which will enable pipe stress engineers to have total confidence that a given design is carried out in accordance with the intent of the code using the latest, fully tested and approved more ‘accurate’ data, without unnecessary over or under conservatism
3. Better and ‘more applicable data’ helps to ensure cost effective, safer systems, fewer or zero failures whilst facilitating a more efficient project workflow with fewer unnecessary system changes (i.e. to resolve problems which don’t exist in practice)

Register Here

About the Speaker:

Deepak Sethia, a Mechanical Engineer by profession is working as Application Engineer, Plant Design Solution with ImageGrafix Software FZCO, Dubai. Continue reading

Comments Off on Join and learn in ImageGrafix Wednesday Webinars about CAESAR-II ASME B31J, the improved method for i & k calculation

Filed under Webinars

ImageGrafix – Wednesday Webinars

Oct 2013

eCustomer – Intergraph Customer Response System

Presenter : Deepak – ImageGrafix Software FZCO

Date: October 09, 2013
Duration: 30 min
Cost: free eSeminar

We are pleased to outline some positive changes that are being made in the delivery of technical support, beginning on September, 2013.  ImageGrafix is enthusiastic about these changes as we know that they will allow us to continue providing you with the high quality technical support that you have come to expect. ICAS has done several things to enhance their support capabilities First, they have formed a dedicated support team for all of the Intergraph CAS product line.  The core members of this team will be Support Engineers who will be focused solely on customer support and they will work closely with all Intergraph Distributor Support Team.  We believe that this approach will result in better resolution times for your questions and issues.

Please click here to download the recorded video of the webinar session: https://attendee.gotowebinar.com/recording/5344959472938097409

Comments Off on ImageGrafix – Wednesday Webinars

Filed under Home, Webinars